AVIROTW

[eSIM] 菲律賓|總量| 3-30天| 二類電信

$131
流量: 3GB
天數: 3天

套餐詳情

  • 容量：3GB-50GB

  • 網路類型：5G / 4G / LTE

  • 功能：僅限網路連線，不支援語音通話與簡訊

  • 交付方式：付款後 5～10 分鐘內透過電子郵件發送 QR 碼

  • 客服支援：全年無休

  • 支援 Wi-Fi 熱點分享（視設備支援而定）

  • 涵蓋地區：菲律賓

使用eSIM的優點

  • 立即取得 eSIM：付款後 5～10 分鐘內寄送至電子郵件

  • 線上啟用：掃描 QR 碼即可使用，無需拔除原 SIM 卡

  • 無需前往門市、無需身分驗證

  • 免費漫遊，無額外費用

  • 支援 Wi-Fi 熱點功能（依設備而定）

使用注意事項（以下時間皆以台北時間 (GMT+8) 為準）

  • 請確認您的裝置支援 eSIM且未被電信業者鎖定

  • 每組 QR 碼僅可使用一次，安裝後請勿刪除 eSIM

  • eSIM 無法轉移至其他裝置，請勿重複安裝

  • 一天的 eSIM 使用時間以24小時為一天計算。

  • 若僅使用一部手機，建議列印 QR 碼隨身攜帶備用

  • 請於收到 QR 碼後 30 天內啟用

  • 啟用裝置需支援 iOS 12.1 或以上，且需連接 Wi-Fi 或行動網路

  • 若抵達目的地後無法正常使用，請先連上飯店或機場 Wi-Fi，立即聯繫客服協助處理

如何確認裝置是否支援 eSIM

1. 確認 eSIM 功能：

  • 撥打 *#06#，若看到「EID」欄位即表示支援

  • 或進入手機設定，若有「新增 eSIM」、「啟用 eSIM」、「新增行動方案」等選項，即表示支援

2. 確認裝置未鎖網：

  • iOS 裝置：
    設定 > 一般 > 關於本機 > 網路鎖定：顯示「SIM 無限制」即為未鎖網

  • Android 裝置：
    設定 > 連線 > SIM 卡管理 > 選擇「行動網路」或「自動選擇網路」，若可見多家電信業者即為未鎖網

相容設備（僅供參考）

  • iPhone：iPhone XS 及以上（iOS 12.1 以上）

  • Samsung Galaxy：S20、S21、S22、S23、Note 20、Z Fold / Flip 系列

  • Google Pixel：Pixel 3 及以上

  • 華為、OPPO、小米：部分高階機型支援
流量
天數

How to install an eSIM on your phone

For iOS

Step 1

Go to "Settings" > "Mobile Data"

Step 2

Select "Add eSIM"

Step 3

Select "Use QR code"

Step 4

Scan QR code or upload a picture

For Android

Step 1

Go to Settings

Step 2

Click "Connect"

Step 3

Click "SIM Card Management Tools"

Step 4

New eSIM

Step 5

Scan QR Code

How to check if your device supports eSIM

Please make sure your phone supports eSIM and is not locked by your carrier or jailbroken.

Dial *#06# to view:
If you see the EID line appear, or there is an item in Settings such as "Add eSIM", "Activate eSIM" or "Add action plan"
→ Indicates that your device supports eSIM.


  • iOS:
    Go to Settings > General > About This Device
    Check the Network Lock section: If it says SIM Unrestricted, your device is not network locked.


  • Android:
    Go to Settings > Connections > SIM Card Management
    If multiple carriers appear, check "Select a mobile network" and "Automatically select a network" to ensure your device is not locked to a specific network.

eSIM is compatible with most mobile phones that support eSIM. Please note that the following list is for reference only:



  • iPhone : iPhone XS and above (iOS 12.1+)

  • Samsung Galaxy : S20, S21, S22, S23, Note 20, Z Fold/Flip

  • Google Pixel : Pixel 3 and above

  • Huawei, Oppo, Xiaomi : Some high-end models support eSIM

Check if your phone supports eSIM?

Check compatibility

iOS Settings

Go to Settings

Android Settings

Go to Settings

eSIM FAQ

How do I set up an eSIM?

On iOS devices:

  1. Settings > Mobile Services > Add eSIM
  2. Use QR code > Scan the QR code directly or upload a picture from your album
  3. Aviro, then complete the installation
  4. In Mobile Data, select the newly installed eSIM as the primary route and enter the eSIM to enable data roaming.

On Android devices:

  1. Settings > Connections > SIM Management > Add Action Plan
  2. Scan QR code > Scan the QR code directly or upload a picture from your album
  3. Aviro, then complete the installation
  4. In Mobile Data, select the newly installed eSIM as the primary route and enter the eSIM to enable data roaming.

Note: Before installation, please confirm that your device supports eSIM and that you have received the QR code or related information provided by Aviro.
Can a device have multiple eSIMs installed?

You can install multiple eSIMs on the same device. However, please note that you can only use one eSIM and one physical SIM card at a time, so you can use two different phone numbers on one phone.

You can switch between different eSIMs in Mobile Data to use the network. If you have multiple eSIMs installed on your device, it is recommended to name each eSIM for easy identification.
Does eSIM support data sharing (hotspot)?

Most eSIMs can share data via mobile hotspots (Wi-Fi sharing) . However, this depends on your eSIM plan and phone model. Some plans may limit internet access to the eSIM device itself and cannot share Wi-Fi with other devices.

Therefore, it is recommended to carefully confirm the eSIM plan content and the support status of the mobile phone before purchasing to ensure that the data sharing function can be used.
How do I remove my eSIM?

On iOS devices:

  1. Settings > Mobile Services
  2. Select the eSIM you want to delete (if the eSIM is not activated, please turn on "Activate this route" first)
  3. Deleting an eSIM

On Android devices:

  1. Settings > Connections > SIM Management (Please make sure eSIM is enabled first)
  2. Select the eSIM you want to delete
  3. Delete eSIM / Remove and confirm the operation

Note: Once the eSIM is deleted, it cannot be reinstalled . Please confirm that it is no longer needed before deleting it.
How can I check which eSIM is currently using data?

On iOS devices:

  1. Settings > Mobile Services (Please make sure eSIM is enabled first)
  2. Action Data
  3. The eSIM with a check mark is the eSIM that is using data.

On Android devices:

  1. Settings > Connections > SIM Management (Please make sure eSIM is enabled first)
  2. Check the eSIM currently in use in mobile data