AVIROTW

＃[eSIM] 美國 - 加拿大 - 墨西哥 |每日流量| 5-30天| 二類電信

$90
流量: 500MB
天數: 1天

套餐詳情

  • 容量：500MB-3GB

  • 使用時間：5、7、10、15、20、30 天

  • 網路類型：5G / 4G / LTE

  • 功能：連接網路

  • 交付方式：付款後透過電子郵件立即發送，提供全天候客服支援

  • 覆蓋範圍：美國、加拿大、墨西哥

  • 支援 WiFi 熱點（視設備而定）

使用eSIM的優點

  • 即時交付 eSIM：付款後約 5～10 分鐘內即可透過電子郵件收到

  • 線上啟用：掃描 QR 碼即可啟用，無需拆裝實體 SIM 卡

  • 無需到店、無需身分驗證

  • 免費漫遊、無額外費用

  • 支援熱點分享

使用注意事項（皆以台北時間為準）

  • 請確認您的裝置支援 eSIM 且無電信商鎖定

  • 每組 QR 碼僅能使用一次，eSIM 安裝後請勿刪除

  • eSIM 安裝後無法轉移至其他裝置

  • 一天的 eSIM 使用時間以24小時為一天計算。

  • 若僅使用一台手機，建議列印 QR 碼並隨身攜帶

  • 請於收到 QR 碼後 30 天內掃描並啟用 eSIM

  • 裝置需為 iOS 12.1 或以上版本，且具有 WiFi 或行動網路以完成啟用

  • 若抵達時無法使用，請連接飯店或機場 Wi-Fi 並立即聯繫我們協助處理

如何確認您的設備支援 eSIM

請確認手機支援 eSIM，且無電信鎖定或越獄：

1. 檢查是否支援 eSIM

  • 撥打 *#06#，若出現 EID 資訊即表示支援

  • 或於「設定」中出現「新增 eSIM」、「啟用 eSIM」或「新增行動方案」等選項

2. 檢查是否為無鎖版本

  • iOS 裝置：
    前往「設定」>「一般」>「關於本機」，確認「網路鎖定」是否顯示「SIM 無限制」

  • Android 裝置：
    前往「設定」>「連線」>「SIM 卡管理」，若能選擇多個電信商並支援「自動選擇網路」，代表未鎖網

相容設備（僅供參考）

  • iPhone：iPhone XS 及以上（iOS 12.1+）

  • Samsung Galaxy：S20、S21、S22、S23、Note 20、Z Fold / Flip

  • Google Pixel：Pixel 3 及以上版本

  • 華為、OPPO、小米：部分高階機型支援 eSIM
流量
天數

How to install an eSIM on your phone

For iOS

Step 1

Go to "Settings" > "Mobile Data"

Step 2

Select "Add eSIM"

Step 3

Select "Use QR code"

Step 4

Scan QR code or upload a picture

For Android

Step 1

Go to Settings

Step 2

Click "Connect"

Step 3

Click "SIM Card Management Tools"

Step 4

New eSIM

Step 5

Scan QR Code

How to check if your device supports eSIM

Please make sure your phone supports eSIM and is not locked by your carrier or jailbroken.

Dial *#06# to view:
If you see the EID line appear, or there is an item in Settings such as "Add eSIM", "Activate eSIM" or "Add action plan"
→ Indicates that your device supports eSIM.


  • iOS:
    Go to Settings > General > About This Device
    Check the Network Lock section: If it says SIM Unrestricted, your device is not network locked.


  • Android:
    Go to Settings > Connections > SIM Card Management
    If multiple carriers appear, check "Select a mobile network" and "Automatically select a network" to ensure your device is not locked to a specific network.

eSIM is compatible with most mobile phones that support eSIM. Please note that the following list is for reference only:



  • iPhone : iPhone XS and above (iOS 12.1+)

  • Samsung Galaxy : S20, S21, S22, S23, Note 20, Z Fold/Flip

  • Google Pixel : Pixel 3 and above

  • Huawei, Oppo, Xiaomi : Some high-end models support eSIM

Check if your phone supports eSIM?

Check compatibility

iOS Settings

Go to Settings

Android Settings

Go to Settings

eSIM FAQ

How do I set up an eSIM?

On iOS devices:

  1. Settings > Mobile Services > Add eSIM
  2. Use QR code > Scan the QR code directly or upload a picture from your album
  3. Aviro, then complete the installation
  4. In Mobile Data, select the newly installed eSIM as the primary route and enter the eSIM to enable data roaming.

On Android devices:

  1. Settings > Connections > SIM Management > Add Action Plan
  2. Scan QR code > Scan the QR code directly or upload a picture from your album
  3. Aviro, then complete the installation
  4. In Mobile Data, select the newly installed eSIM as the primary route and enter the eSIM to enable data roaming.

Note: Before installation, please confirm that your device supports eSIM and that you have received the QR code or related information provided by Aviro.
Can a device have multiple eSIMs installed?

You can install multiple eSIMs on the same device. However, please note that you can only use one eSIM and one physical SIM card at a time, so you can use two different phone numbers on one phone.

You can switch between different eSIMs in Mobile Data to use the network. If you have multiple eSIMs installed on your device, it is recommended to name each eSIM for easy identification.
Does eSIM support data sharing (hotspot)?

Most eSIMs can share data via mobile hotspots (Wi-Fi sharing) . However, this depends on your eSIM plan and phone model. Some plans may limit internet access to the eSIM device itself and cannot share Wi-Fi with other devices.

Therefore, it is recommended to carefully confirm the eSIM plan content and the support status of the mobile phone before purchasing to ensure that the data sharing function can be used.
How do I remove my eSIM?

On iOS devices:

  1. Settings > Mobile Services
  2. Select the eSIM you want to delete (if the eSIM is not activated, please turn on "Activate this route" first)
  3. Deleting an eSIM

On Android devices:

  1. Settings > Connections > SIM Management (Please make sure eSIM is enabled first)
  2. Select the eSIM you want to delete
  3. Delete eSIM / Remove and confirm the operation

Note: Once the eSIM is deleted, it cannot be reinstalled . Please confirm that it is no longer needed before deleting it.
How can I check which eSIM is currently using data?

On iOS devices:

  1. Settings > Mobile Services (Please make sure eSIM is enabled first)
  2. Action Data
  3. The eSIM with a check mark is the eSIM that is using data.

On Android devices:

  1. Settings > Connections > SIM Management (Please make sure eSIM is enabled first)
  2. Check the eSIM currently in use in mobile data