AVIROTW

@[實體SIM] 中國內地及越南|每日套餐 | 3-10天| 一類電信

$185
流量: 1GB/每日
天數: 3天

套餐詳情

  • 容量：1GB/天 – 2GB/天

  • 使用時間：3、4、5、6、7、10天

  • 類型：5G/4G/LTE

  • 功能：網路連線，無語音及簡訊功能

  • 交付：付款後立即郵寄交付

  • 覆蓋範圍：中國內地、越南


使用注意事項

  • 一天的使用時間以24小時為一天計算。

  • 插卡後約需等待 1～3 分鐘搜尋訊號

  • 切勿強插硬拔，以免損壞卡槽或 SIM 卡
  • 若出現「無服務」或「無法上網」，請檢查 APN 設定或重啟手機

  • 若抵達後無法使用，請連接飯店或機場 WiFi 並立即聯繫我們提供支援


  • 香港法例，使用eSIM服務需完成實名登記。請指示提供有效身分證明文件與登記資料，未完成登記者將無法啟用或使用本服務。



    【🔵 Android 手機安裝步驟】

    1. 關機

    2. 使用退卡針插入手機側邊的小孔，取出 SIM 卡槽

    3. 將原本的 SIM 卡取出，放入旅遊 SIM 卡（對準缺口）

    4. 插回卡槽後開機

    5. 手機會自動偵測新 SIM 卡

    6. 開啟數據漫遊功能：

      • 進入【設定】>【網路與網際網路】>【行動網路】> 開啟【數據漫遊】

    7. 若無法上網，請手動設定 APN（行動網路存取點）：

      • 【設定】>【網路與網際網路】>【行動網路】>【存取點名稱（APN）】

      • 點選右上角「+」新增，輸入供應商提供的 APN 資訊（如有）

      • 儲存後選擇剛新增的 APN

    【🔴 iPhone 安裝步驟】

    1. 關機

    2. 使用退卡針插入手機側邊的小孔，取出 SIM 卡托盤

    3. 將原本的 SIM 卡取出，放入旅遊 SIM 卡（對準缺口）

    4. 插回托盤並開機

    5. 手機會自動偵測新 SIM 卡

    6. 開啟數據漫遊功能：

      • 前往【設定】>【行動服務】>【行動數據選項】> 開啟【數據漫遊】

    7. 若無法上網，請手動設定 APN（行動數據設置）：

      • 【設定】>【行動服務】>【行動數據網路】

      • 根據供應商提供的 APN 資訊填入

      • 不需要重啟，儲存後稍等數秒測試連線
流量
天數

How to install an eSIM on your phone

For iOS

Step 1

Go to "Settings" > "Mobile Data"

Step 2

Select "Add eSIM"

Step 3

Select "Use QR code"

Step 4

Scan QR code or upload a picture

For Android

Step 1

Go to Settings

Step 2

Click "Connect"

Step 3

Click "SIM Card Management Tools"

Step 4

New eSIM

Step 5

Scan QR Code

How to check if your device supports eSIM

Please make sure your phone supports eSIM and is not locked by your carrier or jailbroken.

Dial *#06# to view:
If you see the EID line appear, or there is an item in Settings such as "Add eSIM", "Activate eSIM" or "Add action plan"
→ Indicates that your device supports eSIM.


  • iOS:
    Go to Settings > General > About This Device
    Check the Network Lock section: If it says SIM Unrestricted, your device is not network locked.


  • Android:
    Go to Settings > Connections > SIM Card Management
    If multiple carriers appear, check "Select a mobile network" and "Automatically select a network" to ensure your device is not locked to a specific network.

eSIM is compatible with most mobile phones that support eSIM. Please note that the following list is for reference only:



  • iPhone : iPhone XS and above (iOS 12.1+)

  • Samsung Galaxy : S20, S21, S22, S23, Note 20, Z Fold/Flip

  • Google Pixel : Pixel 3 and above

  • Huawei, Oppo, Xiaomi : Some high-end models support eSIM

Check if your phone supports eSIM?

Check compatibility

iOS Settings

Go to Settings

Android Settings

Go to Settings

eSIM FAQ

How do I set up an eSIM?

On iOS devices:

  1. Settings > Mobile Services > Add eSIM
  2. Use QR code > Scan the QR code directly or upload a picture from your album
  3. Aviro, then complete the installation
  4. In Mobile Data, select the newly installed eSIM as the primary route and enter the eSIM to enable data roaming.

On Android devices:

  1. Settings > Connections > SIM Management > Add Action Plan
  2. Scan QR code > Scan the QR code directly or upload a picture from your album
  3. Aviro, then complete the installation
  4. In Mobile Data, select the newly installed eSIM as the primary route and enter the eSIM to enable data roaming.

Note: Before installation, please confirm that your device supports eSIM and that you have received the QR code or related information provided by Aviro.
Can a device have multiple eSIMs installed?

You can install multiple eSIMs on the same device. However, please note that you can only use one eSIM and one physical SIM card at a time, so you can use two different phone numbers on one phone.

You can switch between different eSIMs in Mobile Data to use the network. If you have multiple eSIMs installed on your device, it is recommended to name each eSIM for easy identification.
Does eSIM support data sharing (hotspot)?

Most eSIMs can share data via mobile hotspots (Wi-Fi sharing) . However, this depends on your eSIM plan and phone model. Some plans may limit internet access to the eSIM device itself and cannot share Wi-Fi with other devices.

Therefore, it is recommended to carefully confirm the eSIM plan content and the support status of the mobile phone before purchasing to ensure that the data sharing function can be used.
How do I remove my eSIM?

On iOS devices:

  1. Settings > Mobile Services
  2. Select the eSIM you want to delete (if the eSIM is not activated, please turn on "Activate this route" first)
  3. Deleting an eSIM

On Android devices:

  1. Settings > Connections > SIM Management (Please make sure eSIM is enabled first)
  2. Select the eSIM you want to delete
  3. Delete eSIM / Remove and confirm the operation

Note: Once the eSIM is deleted, it cannot be reinstalled . Please confirm that it is no longer needed before deleting it.
How can I check which eSIM is currently using data?

On iOS devices:

  1. Settings > Mobile Services (Please make sure eSIM is enabled first)
  2. Action Data
  3. The eSIM with a check mark is the eSIM that is using data.

On Android devices:

  1. Settings > Connections > SIM Management (Please make sure eSIM is enabled first)
  2. Check the eSIM currently in use in mobile data