AVIROTW
@[eSIM] 亞太13地 |每日套餐 | 5-30天| 二類電信
套餐詳情
-
容量:1GB -3GB
-
使用時間:5、7、10、15、20、30天
-
類型:5G / 4G / LTE
-
電信商:因國家而異
-
功能:網路連線,無語音與簡訊功能(如需撥打電話請參考T-Mobile eSIM產品)
-
交付:提供電子郵件發送,付款後立即交付,提供大規模客服支持
-
涵蓋範圍:韓國、新加坡、馬來西亞、泰國、菲律賓、印尼、中國內地、香港、澳門、台灣、澳洲、紐西蘭、柬埔寨。
使用eSIM的優點
-
立即獲得 eSIM: 付款後領取 5–10 分鐘即可透過電子郵件發送
-
線上啟用:只要掃描QR碼,抽取SIM實體卡
-
出發前往門市,身分消費驗證
-
免費漫遊,無任何隱藏費用
-
支援WiFi熱點分享(依設備而定)
使用注意事項
-
購買前請確認您的裝置支援 eSIM並支援電信商鎖定
-
安裝後請勿刪除eSIM,每個二維碼只能使用一次
-
安裝後無法轉移至其他設備
-
每日計算方式為eSIM使用時間以24小時為一天計算。
-
若僅使用一手機,建議列印QR碼並攜帶攜帶
-
請於QR碼後30天內完成掃描並啟用
-
裝置需運作iOS 12.1以上版本,並具備WiFi或行動網路連線功能
-
若eSIM無法使用時,請連接機場或飯店Wi-Fi並立即聯絡客服
- 香港法例,使用eSIM服務需完成實名登記。請指示提供有效身分證明文件與登記資料,未完成登記者將無法啟用或使用本服務。
如何確認設備是否支援eSIM
請確認您的手機支援 eSIM,並且配備鎖卡或越獄。
1. eSIM支援查看方式:
-
撥打*#06#,若畫面出現EID編號
-
或在「設定」中出現「新增 eSIM」、「啟用 eSIM」、「新增行動方案」等選項
→即表示您的裝置支援 eSIM
2.手機是否未鎖定網路:
-
iOS裝置:
前往「設定」>「一般」>「關於本機」
查看「網路鎖定」項目:若顯示「SIM無限制」,表示裝置同步鎖定 -
Android裝置:
前往「設定」>「連線」>「SIM卡管理」
若選擇多個電信商,可點選「選擇行動網路」→「自動選擇網路」,即為無鎖定版本
相容設備(成人參考)
-
iPhone:iPhone XS以上版本(iOS 12.1+)
-
三星 Galaxy:S20、S21、S22、S23、Note 20、Z Fold / Flip
-
Google Pixel:Pixel 3以上版本
-
華為、OPPO、小米:部分高階機種支援eSIM
How to install an eSIM on your phone
For iOS
Step 1
Go to "Settings" > "Mobile Data"
Step 2
Select "Add eSIM"
Step 3
Select "Use QR code"
Step 4
Scan QR code or upload a picture
For Android
Step 1
Go to Settings
Step 2
Click "Connect"
Step 3
Click "SIM Card Management Tools"
Step 4
New eSIM
Step 5
Scan QR Code
How to check if your device supports eSIM
Please make sure your phone supports eSIM and is not locked by your carrier or jailbroken.
Dial *#06# to view:
If you see the EID line appear, or there is an item in Settings such as "Add eSIM", "Activate eSIM" or "Add action plan"
→ Indicates that your device supports eSIM.
- iOS:
Go to Settings > General > About This Device
Check the Network Lock section: If it says SIM Unrestricted, your device is not network locked.
- Android:
Go to Settings > Connections > SIM Card Management
If multiple carriers appear, check "Select a mobile network" and "Automatically select a network" to ensure your device is not locked to a specific network.
eSIM is compatible with most mobile phones that support eSIM. Please note that the following list is for reference only:
iPhone : iPhone XS and above (iOS 12.1+)- Samsung Galaxy : S20, S21, S22, S23, Note 20, Z Fold/Flip
- Google Pixel : Pixel 3 and above
- Huawei, Oppo, Xiaomi : Some high-end models support eSIM
eSIM FAQ
How do I set up an eSIM?
On iOS devices:
- Settings > Mobile Services > Add eSIM
- Use QR code > Scan the QR code directly or upload a picture from your album
- Aviro, then complete the installation
- In Mobile Data, select the newly installed eSIM as the primary route and enter the eSIM to enable data roaming.
On Android devices:
- Settings > Connections > SIM Management > Add Action Plan
- Scan QR code > Scan the QR code directly or upload a picture from your album
- Aviro, then complete the installation
- In Mobile Data, select the newly installed eSIM as the primary route and enter the eSIM to enable data roaming.
Note: Before installation, please confirm that your device supports eSIM and that you have received the QR code or related information provided by Aviro.
Can a device have multiple eSIMs installed?
You can install multiple eSIMs on the same device. However, please note that you can only use one eSIM and one physical SIM card at a time, so you can use two different phone numbers on one phone.
You can switch between different eSIMs in Mobile Data to use the network. If you have multiple eSIMs installed on your device, it is recommended to name each eSIM for easy identification.
Does eSIM support data sharing (hotspot)?
Most eSIMs can share data via mobile hotspots (Wi-Fi sharing) . However, this depends on your eSIM plan and phone model. Some plans may limit internet access to the eSIM device itself and cannot share Wi-Fi with other devices.
Therefore, it is recommended to carefully confirm the eSIM plan content and the support status of the mobile phone before purchasing to ensure that the data sharing function can be used.
How do I remove my eSIM?
On iOS devices:
- Settings > Mobile Services
- Select the eSIM you want to delete (if the eSIM is not activated, please turn on "Activate this route" first)
- Deleting an eSIM
On Android devices:
- Settings > Connections > SIM Management (Please make sure eSIM is enabled first)
- Select the eSIM you want to delete
- Delete eSIM / Remove and confirm the operation
Note: Once the eSIM is deleted, it cannot be reinstalled . Please confirm that it is no longer needed before deleting it.
How can I check which eSIM is currently using data?
On iOS devices:
- Settings > Mobile Services (Please make sure eSIM is enabled first)
- Action Data
- The eSIM with a check mark is the eSIM that is using data.
On Android devices:
- Settings > Connections > SIM Management (Please make sure eSIM is enabled first)
- Check the eSIM currently in use in mobile data
